Basement & Garage

Forza Tuning Calculator

For help with undertanding how all of the different parts work and/or help with tunings/fine-tuning, please check out the Basement & Garage Forza Tuning Assistant.

Vehicle Data Input

Enter Year, Make, & Model (optional for multi-tabs & future export)

Enter Vehicle Data for Tuning

Define preferred Damper Stiffness and suspension length of Travel
Enter Tire information. Use Same Size if fornt and rear sizes match.
Enter Power, Weight and misc. information
Fine-Tuning Multipliers

Enter the optional suspension component multiplier (1.00 is standard).

Transmission Tuning (Race Trans ONLY)

"Top Speed", "# Gears" and "Redline RPM" are all required if Transmission tuning is desired. Leave at ZERO (0) if Transmission tuining is not desired.

ADVANCED Transmission Tuning (optional)

If the values are set to non-zero, then the calculator assumes you know what you are doing. Output will be skewed of the inputs here are wrong. The input here is for custom "Final Drive", "1st Gear Ratio", and "1st Gear Top Speed".

The Tune

For help with undertanding how all of the different parts work and/or help with tunings/fine-tuning, please check out the Basement & Garage Forza Tuning Assistant.

FH5 Circuit: 2024 U2SC Saturday-0427
Front Engine / 20-Apr-2024 0427:20
Tire Settings Front Rear
Tire Pressure (Stock): X psi X psi
Gear Ratios
Final Drive: X
Ratios: (1) X - (2) X - (3) X - (4) X - (5) X - (6) X
Alignment Settings Front Rear
Camber: Default Default
Toe (F/R): 0.0 0.0
Caster (use base forza values): Default
Suspension Settings (Normal) Front Rear
Anti-Roll Bar (use base forza values): Default Default
Spring Rate 1.00 x: X X
Rebound (use base forza values): Default Default
Bump (use base forza values): Default Default
Ride Height (set by you): 0.0 0.0
Downforce (set by you): 0 0
Brakes Balance Force
Race Brakes: X% X%
Differential () Front Rear
Acceleration %: X X
Deceleration %: X X
Center Balance %: X
Inputs & Additional Vehicle Data (Imperial)
Power to Weight Ratio nan lbs/HP
Engine & Drive Layout Front Engine
Stock Tire Compound (F | R) 0/0R0 (F) 0/0R0 (R)
Tire Circumfrance (F | R) (F) 0.00 in (R) 0.00 in
Tire Volume (F | R) (F) 0.00 cu ft (R) 0.00 cu ft
Ride Height (input): (F) 0.0 (R) 0.0
Downforce (input): (F) 0 (R) 0
Max Power & Torque 0 HP 0 LB-FT
Total Wght & Wght % Front 0 lbs 0%
Target Top Spd (in 1st) 0 mph (0.00 mph in 1st)
Redline RPM & # of Gears 0 RPM 6

Created & Maintained by MarcusRetaken (a.k.a. justLou72, MarcusLM72, BiggLou55, and Lou)


© 2022 Basement & Garage